
It Looks Clean. But What Is Hiding Inside?
You wash the bowl. You wipe the lid. You scrub every spot you can reach.
But water also runs through a narrow tube, around the pump, and into tiny spaces your brush cannot touch.
That is where slime, mineral scale, and hidden residue can build up over time. Your fountain may look clean on top while buildup is still moving through the water path underneath.
A clean-looking bowl does not always mean a clean fountain.
A New Filter Does Not Clean A Dirty Pump.
Filters catch debris in the water. They do not scrub the tube, clean around the impeller, or remove scale from the pump.
Soap and brushes help with the parts you can see. Vinegar may help with some hard water stains. But the hardest parts of the fountain are still difficult to reach by hand.
RYVO adds the missing step. It sends the cleaning solution through the same hidden path the water uses every day.
Before you replace the pump, give the whole water path a deep clean.
WHY RYVO WORKS
It Goes Where Your Brush Cannot.
Once dissolved, RYVO creates an active cleaning solution inside the fountain.
As the pump runs, that solution moves through the tubing, pump housing, water channels, and tight internal spaces. It helps loosen slime-like film, mineral scale, and residue along the way.
- Fizzing action spreads the formula through the water.
- Pump circulation carries it through hidden pathways.
- Cleaning ingredients help loosen film and mineral buildup.
- Fresh-water cycles rinse the system clean.
Your brush handles the open surfaces. RYVO handles the hidden water path.
Drop It. Run It. Rinse It. Done.
RYVO turns your fountain's own pump into part of the cleaning process.
- Unplug, drain, and remove the filter.
- Add the correct tablet dose and fill with warm water.
- Let the tablet dissolve, then run the fountain for 15 to 20 minutes.
- Drain the cleaning water completely.
- Refill with fresh water and circulate for 2 minutes.
- Drain and repeat the fresh-water rinse 2 to 3 times.
Wipe the open surfaces, replace the filter, and refill with fresh drinking water.
Keep pets away from the fountain during cleaning. Never let them drink the cleaning solution.
Over 13,000+ Customers
See what some of our customer has to say about our tablets!
Frequently Asked Questions
How is this different from washing the fountain by hand?
How is this different from washing the fountain by hand?
Hand washing cleans the parts you can reach. RYVO circulates through the pump, tubing, and internal water path. For the best clean, use both.
Can my pet drink the cleaning water?
Can my pet drink the cleaning water?
No. Keep pets away while the solution is active. Drain it completely and rinse the fountain with fresh water 2 to 3 times before refilling.
Should I remove the filter first?
Should I remove the filter first?
Yes. Remove charcoal and replaceable filters before cleaning. Put a clean filter back in after the final rinse.
Can it help with weak water flow?
Can it help with weak water flow?
It may help when slime or mineral buildup is blocking the water path. It cannot repair a damaged, worn, or broken pump.
Does it remove hard water stains?
Does it remove hard water stains?
It helps loosen calcium, limescale, and other mineral buildup. Heavy deposits may need a 2nd cleaning cycle and a light wipe afterward.
Will it clean the pump and tubing?
Will it clean the pump and tubing?
The dissolved solution circulates through the pump and tubing while the fountain runs. This helps clean areas that are difficult to reach with a brush.
Can I stop scrubbing the fountain?
Can I stop scrubbing the fountain?
No. The tablet handles hidden pathways. You should still wipe or brush the bowl, lid, and other open surfaces.
Can I use denture tablets instead?
Can I use denture tablets instead?
Denture tablets are made for dental products, not pet fountains. RYVO uses fountain-specific dosing, circulation, and rinse instructions.
What fountain materials can I use it with?
What fountain materials can I use it with?
It is made for common stainless-steel, plastic, and ceramic fountains. Always check your fountain maker's cleaning instructions first.
How often should I use it?
How often should I use it?
Use it as part of your regular deep-clean routine. Water hardness, fountain size, and the number of pets using it can all affect how quickly buildup returns. Follow the frequency printed on the product label.
How many tablets do I need?
How many tablets do I need?
Use the dose printed on the label for your fountain's full water capacity. 1 to 3 L takes 1 tablet, 4 to 6 L takes 2, 7 to 11 L takes 3, and 12 to 16 L takes 4.
Will it disinfect or sterilize my fountain?
Will it disinfect or sterilize my fountain?
No. RYVO is a cleaner and descaler. It helps loosen and flush away buildup. It is not a disinfectant or sterilizer.
What if it does not work for me?
What if it does not work for me?
You are covered by our 30-day money-back guarantee. Try it on your own fountain, and if it is not right for you, send it back for a full refund under the terms in our refund policy.
